Create bootable pen drive using window CMD (Command) Console, Make bootable pen drive for software installation.

Dear users, JKS DIGI welcoming you all, if you want to make an external pen drive bootable using the cmd (Command) Console to install any kind of application software on your Laptop, Desktop or PCs. Bootable pen drive is good to run any application software for installation or upgradation. To create a bootable pen drive easily using the cmd Command Console through the little useful type of commands of DOS Commands (Disk Operation System).

For more information kindly visit at http://digiaccess.in/  

https://jksdigis.blogspot.com/p/index.html 

To create a bootable pen drive using cmd (Command) Console by the following ways as :

Plug or attach or join your pen drive into the usb port of the Laptop or Desktop or your PCs.

After that, press window logo on your keyboard or type cmd (Command) in search box or click on the start menu all programmee and find or search cmd (Command) console and right click on the cmd (Command) Console then click on the run as administrator from the options.

Just type or write the correct cmd commands in any case like upper case or lower-case letter. There is no case-sensitive in cmd command console. CMD commands will be correct or true to process the console.

Just type diskpart  or  DISKPART and hit or click enter key to process the next step from the keyboard in the cmd console window like in below image as :

Please follow and Subscribe at   https://www.youtube.com/jksdigi

For more information kindly visit at http://digiaccess.in/ 

https://jksdigis.blogspot.com/p/index.html 

After that, type or write list disk or LIST DISK after the DISKPART> list disk and hit the enter key from your keyboard to process the next step.  Kindly see in this picture below as :

Now the next step is to selecting the disk which you want to make or create a bootable disk an external pen drive is displaying in the image given below like as :  just type DISKPART>select disk 2

A message will be display on your screen as Disk 2 in now the selected disk.

Now, the time to clean the selected disk after the above process. Just type the DISKPART>clean to clean the selected disk drive as like :

A message will be appearing below the cmd command as DiskPart succeeded in cleaning the disk.

Now, the time is to creating the primary partition of selected disk drive in the above process. To create a primary partition of the selected disk drive, just type DISKPART>create part pri  in the cmd console window and hit or click on the enter key from the keyboard to process the next step and see the image below as :

A message will be appear on the screen like as DiskPart succeded in creating the specified partition.

Please follow and Subscribe at   https://www.youtube.com/jksdigi

For more information kindly visit at http://digiaccess.in/ 

https://jksdigis.blogspot.com/p/index.html 

Now, the time to selecting early created primary partition in the earlier process. Now select your primary partition first (1) in this process. Just type DISKPART> select part 1 to process the next process to creating or making the bootable pen drive. Kindly see an image like as :

A message will be appear on your screen as Partition 1 is now the selected partition.

Now, the time is to format quickly the selected primary partition as ntfs format quickly. Just type the DISKPART> format fs=ntfs quick and the hit the enter key from the keyboard to complete the next process to making the bootable pen drive. Kindly see an image below like as :

A message will be appearing on your screen as 100 percent completed DiskPart successfully formatted the volume.

Now in this process to make the selected partition active to make the bootable pen drive. Just type DISKPART>active and then hit the enter key from the keyboard to process the next step as like in this image below as :

A message will be display on your screen as DiskPart marked the current partition as active.

Now, last but not the least, Just type the DISKPART>exit and hit the enter key from the keyboard to complete the process as like in below given image as :

A message will be appear on your screen as Leaving DiskPart …..

Now your process is completed to create a bootable pen drive for application. Just go your desire folder which containing your application and copy and paste all the files and folders into the external pen drive.

Thanks!

JKS DIGI

Please follow and Subscribe at   https://www.youtube.com/jksdigi

For more information kindly visit at http://digiaccess.in/ 

https://jksdigis.blogspot.com/p/index.html